您好,欢迎访问优校网! 收藏本页 手机访问
今天是:

skating area是什么意思


中文翻译滑区

网络释义

1)skating area,滑区2)landslide subzone,滑坡分区3)slip regime,滑移区4)sliding sector,滑动区5)slip flow regime,滑移流区6)Landslide,库区滑坡

用法例句

    This is one of the major factors which causes the disagreements on the friction factor of microchannel flow in the literature; for the gaseous flow in the slip regime, an evident lower flow resistance is observed due to the gas rarefaction effect which causes.

    实验结果表明,即使在较小的相对粗糙度高度下,由于微通道中的粗糙度分布密集,会极大地增加流动阻力,这是导致文献中微通道流动阻力系数实验值相互偏差的主要原因之一;而对于滑移区的气体流动,气体稀薄性使流动阻力明显减小而导致流量增加。

    This paper is about the gas flow in slip regime (0.

    本文针对滑移区内(0。

    Fretting wear tests in slip regime of WC-12Co coating were carried out on a high precision hydraulic fretting wear test rig.

    采用高精度高温液压式微动磨损试验机研究了涂层的微动磨损行为,用扫描电镜(SEM)、能谱仪(EDS)、激光共焦扫描显微镜(LCSM)对等离子喷涂WC-12Co涂层大气氛围中从室温(25℃)至400℃的滑移区微动磨损特性进行了研究,并与无涂层的TiAlZr钛合金基材进行了比较。

    Based on variable structure control theory and the method of zeroing the rate of line-of-sight (LOS) angle between missile and target, a suitable sliding sector is chosen instead of conventional sliding mode, and a three-dimensional continuous extended sliding mode guidance law is designed by considering the maneuvering acceleration of target as a disturbance with known boundary.

    基于变结构控制理论的方法和零化弹目视线角速率的思想,选择一个合适的滑动区域代替传统变结构滑动模态的设计,同时将目标的机动加速度视为已知的有界扰动,设计得到了具有鲁棒性的三维扩展的连续滑动模态末制导律。

    In this paper a theoretical analysis of heat transfer characteristics is presented for the fully developed laminar flow of the incompressible gas in the triangular microchannels in slip flow regime.

    针对微三角形槽道利用正交函数法求解了滑移流区内带温度跳跃边界条件的能量方程 ,对不可压缩气体在微三角形槽道内充分发展层流滑移流动的换热特性进行了理论分析 ,获得了轴向定热通量加热、周向均匀壁面温度条件下微三角形槽道内的温度分布和换热特性的分析解 。

    In this article, a theoretical analysis for laminar flow in the equilateral triangular and isosceles triangular microchannels in slip flow regime was presented.

    计算结果表明 :正交函数法适用于三角形微槽内滑移流动特性的分析计算 ;在滑移流区 ,三角形微槽边界上出现滑移流动 ,且随着 Knudsen数 (气体分子的平均自由程与流道特征尺寸之比 )的增大 ,壁面上的滑移速度越大 ,流动阻力随之减小 ,但三角形微槽的三个角区边界上的滑移速度增加较小 ;三角形微槽的高宽比对无量纲阻力常数随 Kn的变化关系影响很小。

    A theoretical analysis is conducted for flow and heat transfer characteristics in this microchannel on the condition of one wall heated alone with uniform heat flux and two walls heated with different heat flux in slip flow regime.

    结果表明:滑移流区微环继通道内的流阻和Nusselt数明显低于连续流区;且随着Kn数的增加,流阻和Nusselt数均减小;但其随内外径比r*的变化趋势与连续流区相似。

    Problems on Investigation of the Landslides in the Three Georges Reservoir Zone;

    重庆三峡库区滑坡勘察工作中的一些问题

    Study on the Fretting Wear Behaviours in Slip Regime of WC-12Co Coating Prepared by Plasma Spraying at Elevated Temperature

    等离子喷涂WC-12Co涂层滑移区高温微动磨损特性研究

    Move the slider to set the security level for this zone.

    移动滑块设置该区域的安全级别。

    Move the slider to set the privacy level for this zone.

    移动滑块,为此区域设置隐私等级。

    rhegmatic pattern

    区域性走向滑移断裂模式

    Non-Detection Zone of Slip-Mode Frequency Shift Method

    滑模频率偏移法的孤岛检测盲区分析

    translation gliding

    平移滑动, 直移滑动

    Numerical Simulation of Footinggroove of Beijing Central Business District;

    北京商务中心区土钉墙滑移面的数值模拟

    EXPANSION OF METALLIC TUBES DRIVEN BY GRAZING DETONATION PRODUCTS BEHIND TWO HEAD-ON COLLIDING DETONATION WAVES;

    滑移爆轰驱动金属圆管及对碰区的研究

    The Calculation of the Friction Factors on the Tool Edge Based on Theory of Slip Line Field;

    基于滑移线场理论的刃前区摩擦状态因数计算

    Modified constitutional relation of reinforcement for RC anchored zones considering bond and slip

    考虑粘结滑移的RC锚固区段修正钢筋本构关系

    Average Constitutional Relationship of Unanchored Zone of RC Structure with Considering Bond and Slip

    考虑粘结滑移的RC非锚固区段平均本构关系

    Study of Land Utilizes Problem on the Basis of Landslides Stability in the Three Gorges Reservoir Region of Yangtze River;

    基于滑坡稳定性的三峡库区移民迁建区土地利用问题研究

    ANSYS Analysis on Sliding Displacement of Sliding Isolated Structure;

    滑移隔震结构滑移量的ANSYS分析

    An analysis for flow and heat transfer between two parallel plates microchannel with one wall heated in slip flow regime

    滑移流区平行平板微通道内单侧加热流动与换热

    With the increasement of material’s density ,the fracture strain trace position ascended and deformation safety region was enlarged.

    润滑和增大坯料密度可使断裂应变迹线上移,变形安全区增大。

    Flow and Heat Transfer Characteristics in Microchannel in Velocity-Slip and Temperature-Jump Regime;

    速度滑移及温度跳跃区微尺度通道内的流动与换热

    Interface Slip and Full Process Analysis of Double Steel-Concrete Composite Beam under Negative Bending;

    钢-混凝土双面结合梁负弯矩区滑移及受弯全过程分析

    Study and Enhancement on Buffer Management for Smooth Handover in Mobile IPv6;

    移动IPv6平滑切换中缓冲区管理机制的研究和改进